Bravo Company

Mil-Spec height carry handle for flat top AR-15, M16A4, M4, M4A1 rifles and carbines. Compatible with taller F marked front sight bases. Machined from 7075T6 forgings, hard coat anodized, staked thumb screws, A2 aperture, 6/3 windage drums.Hard coat anodized A2 Aperture MILSPEC height..

The BCM® Extractor Spring is a heavy coil design made for the increased extractor tension required on many AR15, M4, M16 short barreled rifles. This product also improves the reliability on a standard 16" and 14.5" carbines.As with all BCM branded products, the highest quality is the primary foc..

The BCM® Extractor Spring is a heavy coil design made for the increased extractor tension required on many AR15, M4, M16 short barreled rifles. This product also improves the reliability on a standard 16" and 14.5" carbines.As with all BCM branded products, the highest quality is the primary foc..

Bravo Company introduces the BCM® Stock Assembly - Mod 0 - SOPMOD (Widebody).The strongest light-weight polymer stock available for your mil-spec receiver extension is here!More pronounced cheekweld (SOPMOD type) Snag free Design. No sharp edges prevent tangling of the rifle with t..

BCM® Stock Assembly - Mod 1 - SOPMOD (Widebody) CompartmentStrong and Lightweight for your mil-spec receiver extension. More pronounced cheekweld (SOPMOD type) Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit..

Bcmgunfighter Ambidextrous Charging Handle 556 Mod 3X3 (Large Latch) - BCM-GFH-MOD3X3-556 - AR-Platforms/M16..

Bravo Company - 1913 Light Mount Modular (M-LOK® Compatible) - BCM-1913LM-MCMR - Mounts/Rails & Adapters..

BCM® Enhanced Lower Parts Kit for your AR15 Lower ReceiverThis kit includes all the Mil-Spec quality components you have come to expect from BCM, along with some fantastic upgrades to include; BCM PNT Trigger Assembly BCM Pistol Grip, Mod 3 BCM Enhanced Trigger GuardIn a commercial market..

Direct Attach to KeyMod VersionLow-profile length for increased mobility and decreased 'snag' factor.The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.Can be mounted in reverse angle to increase control when grabbing handguar..

Direct Attach to KeyMod VersionLow-profile length for increased mobility and decreased snag factor.The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.Can be mounted in reverse angle to increase control when grabbing handguard ..

The new (United States Patent 9,709,358) BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories.Most of the industry relies on a simple screw and backing nut..

The new Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories.Most of the industry relies on a simple screw and backing nut for a mounting sy..

A Charging Handle for the 21st Century Gun FighterA NEW Charging Handle and Extended Latch SystemCharging Handle forged from 7075 T6 AluminumHard Coat Anodized per Mil-A-8625F, Type III, Class 2GFH - Mod 3B (large latch) and Mod 4B (medium latch)The Mod 3B latch extends pa..

Selected as one of the "Best of SHOT Show 2012", by Military Times Gear ScoutBCM® Offers Another Product Designed for the Modern Day Gun Fighters !Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire c..

For 1913 Mounted Lights - KeyMod™ VersionFully ambidextrous: made to mount flush or cantilever off either the left or right side of the rail system. Optional high and low mounting position for the 1913 rail section. Fits most common 1913-rail pistol/weapon light systems Multiple mountin..

Rail section is made of Lightweight Impact Resistant Polymer.Mounting hardware is made of Corrosion Resistant Stainless SteelAvailable it three popular colors: Black, Flat Dark Earth and Foliage GreenMade to the Mil-Standard 1913 Picatinny Arsenal Specifications.Available is three Le..

Rail section is made of Lightweight Impact Resistant Polymer. Mounting hardware is made of Corrosion Resistant Stainless Steel Available it three popular colors: Black, Flat Dark Earth and Foliage Green Made to the Mil-Standard 1913 Picatinny Arsenal Specifications. Available is three Length..

Made to fit ALL KeyMod™ mounting surfaces with seven (7) consecutive KeyMod Slots.Ultra-slim and radiused surface to allows a round handguard feeling, from an octagonal profile.Aggressive Non-Slip or Non-Reflective surface.Ventilated for cooling.Available in the popular colors of Bla..

BCM®™ KAG-KMKinesthetic Angled Grip - KeyMod™ Version The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry.Designed to complement modern s..

BCM®™ KAG-1913Kinesthetic Angled Grip - Picatinny 1913 Rail Version  The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry.Designe..