Ranger Point Precision Henry Lever Rifle Peep Sight Brass - RPP-102

The perfect low light hunting peep sight up to 200 yards.. Best out to 150 yards (not for long distance):

Made for fast sight acquisition and cloverleaf groups. Use the scope -like reticle and the bright green fiber optics to get on target fast. Pair it with a TruGlo front sight for a three dot pistol setup (TruGlo sights not sold on our site)

SCROLL DOWN:

To read about all of the unique features of these peep sights

FITS:

Henry Large Caliber rifles chambered in 45-70 30-30, 360, 38-55

FITS:

Should work with your factory sight OR any replacement front sight (fiber optic or otherwise).

PLEASE NOTE:

Henry rifles sometimes have issues with running out of rear sight elevation. Henry's come from the factory with tall front sights, usually .550" - .570" tall. Up to around .565" will, for the most part, work just fine.

In the Package: one sight base w/windage screw, one aperture spring w/ elevation screw, two mounting screws, one Allen wrench. 

CLOVERLEAF RECEIVER PEEP SIGHTS KEY FEATURES:

- Sleek, low profile, snag-free winged base secures the aperture spring against damage and zero loss while presenting an elegant, dare we say sexy, profile.

- Low aperture sight height elevations (from .26" in the center of the sight up to .36") 

- Clearly marked, scope-like windage and elevation marks make for quick and precise adjustment

- CloverLeaf aperture provides an exceptionally large, .165", bright target picture while still allowing for scope-like, precise shot placement with bright fiber optics on either side

- One piece aperture spring assembly offers robust, repeatable adjustment, and interchangeability between all bases/rails. 

- Matte blasted top sighting channel greatly reduces reflective light interference.

- Type III anodized 7075 billet or lacquered brass bar stock bases look great for a lifetime.

SPECIFICATIONS:

WINDAGE: Side-to-side .09" (using set screw) 

SIGHT HEIGHT (from receiver base to center of peep): .26" - .36" works with factory front sights (using set screw)

CLOVERLEAF SPRING: .165" ghost opening and 2.3" length tail (rides along the bottom of the base/rail)

SMALL BASES Pistol Calibers: 3.31" length x .650" width

LARGE BASES Big Bores: 3.66" length x .650" width

What Makes Our Peep Sights Different? 

- Traditional receiver mounted rear peep sights are too tall, forcing you to go on a hunt for a suitable front sight when you'd rather be hunting. 

- Delicate aperture stems are exposed to rough handling, come loose / unscrewed during use, and are prone to snagging. 

- Elevation and windage adjustments use fiddly double set screws that often vibrate loose. 

- Blued steel bases rust and lose their luster.