Description
Spanner Wrench for Mauser recoil lug nut.
*This wrench fits the majority of 8mm milsurp Mauser
variant designs with K98 type recoil lug nut (K98k, M24/47, M48, vz. 24, etc.).
Will also fit the majority of military surplus Mosin Nagant variant designs
with original type recoil lug nut (M9130, M38, M39, M44, T53, etc.). PLEASE
MEASURE YOUR HOLE CENTER DISTANCE BEFORE PURCHASING!
Wrench is an approximate 3/4″ long alloy steel hex body
with black oxide finish for use with a standard 1/2″ socket and ratchet. The
hex body has a recessed center to allow for clearance of lug thread and is OD
chamfered to minimize any stock interference (care should be taken not to
damage stock). The hardened (60Rc) alloy steel dowel pins are 1/16″ diameter
on .413″ (10.5mm) centers and extend approximately 1/8″. Dowel pins
have a calculated single shear strength of 465 lbs and have been tested to 15
ft lbs max. Wrench is not designed for removal of nuts corroded in place.
Socket, ratchet and nut are NOT included.
Please note that the Mauser Scout Scope Mount (MK98SSM)
already includes this spanner wrench.