GG&G Mossberg 940 JM PRO FastFire Red Dot Scope Mount - Fits Burris FastFire 3 and 4 Footprint - GGG-3449

American Manufactured and Tested By GG&G For The Mossberg 940 JM PRO 12ga Shotgun.

This 940 JM Scope Base Fits The Burris FastFire 3 and 4 and approximately 5 Other Red Dot Optics With a Similar Footprint.

Be Advised!  Attachment Screw Lengths Vary From Red Dot Scope To Scope. Longer screws may damage the top of your shotgun!

IMPORTANT NOTICE! Although we include mounting screws for the Burris FastFire 3 and FastFire 4 red dot optics, there are approximately 5 other Micro Red Dot Optics that fit this GG&G Mossberg 940 JM PRO Red Dot Scope Mount. A fitment list is provided in the Specification section below.

Please be advised that the screws that are included with this GG&G Red Dot Mount are specific to mounting the Burris FastFire 3 and 4 and may be too long for mounting other red dot optics. If you attempt to mount any of the optics listed below or others not specifically listed without verifying screw lengths, you may dimple the top of the receiver!

Ensure you have the proper length screws prior to installing any other optic than the Burris FastFire 3 and FastFire 4!  PROCEED WITH CAUTION! DAMAGE TO YOUR RECEIVER COULD OCCUR.

Mossberg 940 JM PRO FastFire Red Dot Scope Mount-Burris FastFire Footprint

The quick target axquisition ability of the Burris FastFire 3 and FastFire 4 mini red dot scopes, make it one of the favorite red dots of Mossberg 940 JM Pro shooters. The GG&G Mossberg 940 JM Pro FastFire Mount has the scope attachment layout specifically for the Burris FastFire 3 and FastFire 4 Red Dot Optic. There are at least 5 other red dots that have the same footprint, but please beware of screw lengths.

Please read the IMPORTANT NOTICE below the image. The mounting hardware supplied in this package is only tested to fit the FastFire 3 and 4 optics.

The Mossberg 940 JM Pro Burris Low Profile Red Dot Mount, is CNC machined to easily mount to the Mossberg 940 JM Pro receiver. It provides solid engagement with the top of the Mossberg 940 JM Pro receiver. 

The GG&G America Made low profile Burris Mount set up for the Mossberg 940 JM PRO, coupled with either the Burris FastFire 3 or FastFire 4 Red Dot Scope or any of the red dots having the same footprint, provides a rugged and accurate quick target acquisition package.
 

Mossberg 940 JM PRO FastFire Red Dot Scope Mount Specifications:

• Installation does not require any permanent modifications to your Mossberg 940 JM Pro Shotgun. Depending on your shotgun, you may have to remove the standard dovetail scope mount if equipped with one.
• The 940 JM Pro Red Dot Scope Mount For FastFires is easy to install using factory drilled and tapped mounting holes.
• The GG&G package includes hardware for mounting the FastFire 3 and 4 Scope Mount to the Mossberg JM Pro receiver. The package also includes hardware specifically for mounting the Burris FastFire 3 and 4 to the scope mount.
• Hex key wrenches are included.
• The 940 JM PRO Red Dot Scope Mount for the FastFire footprint fits several other red dot optics but beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the Burris FastFire 3 and 4 optics.
• Here is the red dot fitment list that GG&G is aware of as of 8/24: Primary Arms SLX RS-10, SightMark Mini Shot M-Spec and Mini Shot Pro Spec, Vortex Venom, Vortex Viper.
• All edges are deburred for the shooter's safety.
• Rounded edges provide a snag free operation.
• Material: The 940 JM PRO FastFire Mount is manufactured from 6061-T6 aluminum.
• Length: 1.965".
• Width:  1".
• Thickness: .250".
• Body Finish: Matte black Type III hard coat anodized per Mil-Spec to protect it from the elements.
• Weight: 0.5 oz.
• Warranty: Lifetime.
• Made in America By Men And Women Proud To Be Americans!