Ranger Point Precision Costa S&W 1854 M-LOK Handguard Rail System - RPP-8004

DESIGNED WITH:

Direct input and oversight by Chris Costa, Costa Ludus.

FITS:

Smith & Wesson 1854 Rifles

FEATURES:

13.25" L handguard: Grippy cutouts, M-LOK accessory slots sides/bottom, QD swivel sling holes, traditional sling stud threaded hole.

MATERIAL:

6061-T6 aluminum Type III Anodized

INCLUDED:

COSTA M-LOK Handguard w/ two gator rails for on top of the handguard and a new tenon/screws

COSTA PICATINNY RAIL SYSTEM:

2 of the 3 pieces included. Not Included: Costa Marlin S&W 1854 Receiver Rail sku 1403 (available on website)

DESIGNED WITH:

Direct input and oversight by Chris Costa, Costa Ludus.

FITS ROSSI 95:

Fits all Rossi 95 rifles (NOT the Rossi 92 or Citadel or Puma rifles)

FITS MARLIN:

End Cap Models: 1895, 1894, 444, 450M, 336 Dark, 30A & 30AS

DOES NOT FIT:

Any Marlin rifle that has a barrel band holding on the factory forearm.

FEATURES:

13.25" L handguard: Grippy cutouts, M-LOK accessory slots sides/bottom, QD swivel sling holes, traditional sling stud threaded hole.

MATERIAL:

6061-T6 aluminum Type III Anodized

COSTA M-LOK HANDGUARD:

NCLUDED: One Handguard w/ two gator rails + new tenon/hardware

COSTA PICATINNY RAIL SYSTEM (3 pieces total)::

2 of the 3 pieces included. Not Included: Costa Marlin or R95 Receiver Rail (available on website)

Designed with direct input and oversight by Chris Costa, Costa Ludus.

The forearm with one or two gator rails provides Marlin and Rossi 95 rifle owners users with lots of red dot/scout scope/night vision installation options.

The Costa Ludus/Ranger Point Handguard Rail System was designed to provide lever gun shooters with exceptional flexibility in setup and cost while safeguarding the qualities of lightweight handling and accuracy that we love about these fine firearms.

In order to accommodate a range of manufacturing tolerances in the host rifles, we have imbued the entire handguard/rail system with adjustable fitments. 

The Costa/RPP Handguard + Rail system has adjustment in 3 ways:
1. Laterally at the receiver junction–via the angled set screws.
2. Laterally at the mounting tenon–via the perpendicular set screws and the tenon itself.
3. Vertically at each leg of the “Gator Rails.”

 Features:

• Extremely robust for hard use. The installed system can suspend well over a hundred pounds and resist crushing under the weight of an adult male.
• Modular flexibility allows mounting of any style of optic or combination of sighting options. The handguard “Gator Rails” can be rotated 180 degrees to achieve the perfect eye relief with red dot or LER scopes. Unused rails can be removed to reduce weight or achieve lower mounting heights.
• Includes M-LOK accessory slots, QD mounts, and a threaded hole for a traditional sling stud for max utility.
• Unique, aggressive look and excellent grip with or without a hand stop.
• Two-piece rail system decouples the forearm from the receiver, preserving optimal accuracy.

Ranger Point Precision Henry 22 Rimfire M-LOK Aluminum Forearm Handguard fits H001 and H001L Classic models, H001Y Youth, H001M Magnum, H001V Varmint Express (tight on octagon barrels, needs gunsmith fitting).

Robust build quality. One piece designed, Black Type III anodized aluminum coated. The RPP M-LOK handguard is supplied with a purpose built barrel band which clamps around the barrel.

Easy DIY Install. We wanted to guarantee a drop in fit, with no gunsmith required. Watch the installation video which is only 4:05 long. 

Practical functionality. Our handguard offers compatibility with all standard M-LOK accessories as well as flush cup style QD attachments (e.g swivel slings). 

Natural ergonomics. While this is a subjective category, we tested numerous designs before settling on this one as the best. The flat bottom provides stability when shooting from a rest, the slender width accommodates most hand sizes, and deep finger grooves along the entire top section offer excellent control for offhand shooting. Throughout, you’ll find radiused, chamfered, or tumbled edges to make the guard comfortable on bare hands. No cheese graters here.

Key Features:
- One piece  (slender width, height, weight almost the same as 3.5oz factory wooden forearm)

- Specs 11" long, 1.25" wide, and 1.5" tall long 

- Side mounting holes one each side for the barrel band to attach (6.813" from receiver)

- Finger grooves all along the top, 18 M-LOK slots (sides + bottom), 3 QD Flush Cups for a sling swivel (one on each side, one on the bottom) 

- Every Type III anodized 6061 aircraft grade aluminum part is chamfered, deburred, and tumbled to provide a smooth comfortable finish with no cheese grater effect

- Self-bedding, padding on the receiver end is an industry first, allowing fast, end user installation and superior accuracy (installs in about 4 minutes)

Similar design to the our larger Henry M-LOK Aluminum Handguard for Centerfire Rifles.