Menu
Your Cart

Grips & Pads

AIM Sports 3" Tactical Vertical Grip/Short
3-4 Weeks
Brand: AIM Sports Model: AIMS-PJHG2
Lightweight and simple, this adapter attaches to a mil-spec Picatinny.  •  Compatible with Weaver / Picatinny 1913 Rails •  Black polymer finish..
C$19.99
Brand: AIM Sports Model: AIMS-PJPHG
Full sized 4" black foregrip with textured surface. Slides on to Picatinny rails and locks with an indexing peg.  •  Compatible with Weaver / Picatinny 1913 & Stanag 4694 Rails •  Black polymer finish..
C$20.99
Aim Sports AK PISTOL GRIP
3-4 Weeks
Brand: AIM Sports Model: AIMS-PJAKG
High strength polymer with generous textured surfaces. Vertical grip angle for modern squared shooting stances.  •  Steep angled design with care attention to ergonomics •  High density, durable, lightweight polymer construction with subtle texturing on the sides, with front and..
C$21.99
AIM Sports AR FEATURELESS GRIP
3-4 Weeks
Brand: AIM Sports Model: AIMS-PJFARG
The Aim Sports Modern Sporting Rifle AR Grip includes a removable fin and backstrap. Complete with steel AR grip screw, washer and roll pin for permanent attachment. Made of glass reinforced high composite polymer and a modern ergonomic design. This product has not been approved for legal compliance..
C$41.99
Brand: AIM Sports Model: AIMS-PJSPG500
Designed with modern squared shooting stances in mind. This grip was built from the ground up to fit to the ergonomics of the human hand.  •  Durable polymer construction •  Ergonomic texture grip design •  Drop-in Fit •  Accepts AR-15 buffer tubes..
C$31.99
Brand: AIM Sports Model: AIMS-PJSPG870
Designed with modern squared shooting stances in mind. This grip was built from the ground up to fit to the ergonomics of the human hand.  •  Durable polymer construction •  Ergonomic design with side texturing, front and back serrations •  Drop-in Fit •  Non slip ba..
C$32.99
Brand: AIM Sports Model: AIMS-PJTGR
Ultimate in customization, this grip is cut for a pressure switch pad, and supports additional accessories with two rail panels molded to the housing.  •  Compatible with Weaver / Picatinny 1913 Rails •  Side panel wire pressure switch housing •  Black polymer finish..
C$29.99
Brand: AIM Sports Model: AIMS-MT007E
Combination ergonomic vertical grip w/ finger grooves and rail panel for mounting to USGI M4 or M16A2 handguards. No gunsmithing required for installation.  •  Ergonomic finger grooves for comfortable grip •  Mounts to USGI M4 or M16A2 handguards •  Black polymer finish..
C$23.99
Brand: ATI Outdoors Model: ATI-RPG0100
Fits:Mossberg 500/535/590/835 12ga & 20ga (proud fit), Maverick 88 12ga & 20ga (proud fit) Remington 870/887 12ga Winchester SXP 12ga For the Winchester 1200/1300 12ga & 20ga (proud fit) you will need an additional adaptor, click here for the adaptor. SXP model y..
C$86.99
Brand: ATI Outdoors Model: ATI-RPG0300
Fits:Mossberg 500/535/590/835 12ga & 20ga (proud fit), Maverick 88 12ga & 20ga (proud fit) Remington 870/887 12ga Winchester SXP 12ga For the Winchester 1200/1300 12ga & 20ga (proud fit) you will need an additional adaptor, click here for the adaptor. SXP model y..
C$86.99
ATI Outdoors - T3 Shotgun Rear Pistol Grip Combo Package
3-4 Weeks
Brand: ATI Outdoors Model: ATIA.5.10.2559
Fits:Mossberg 500/535/590/835 12ga, Maverick 88 12ga Remington 870 12ga Winchester 1200/1300 12ga you will need an additional adaptor, click here for the adaptor. Winchester SXP model year 2021 and newer will require modification to the adaptor before assembly to the shotgun, click..
C$255.99
ATI Outdoors AK-47 Strikeforce Handguard with Picatinny Rails in Black
3-4 Weeks
Brand: ATI Outdoors Model: ATIA.5.10.2346
Fits: Most AK stamped receiversNote: Will not fit the M-70. (The M-70 has a stamped receiver, but utilizes a different principle of attaching the stock and the gas piston is longer than a standard AK.)Strikeforce Rifle Handguards Ergonomic Design Non-Slip Textured Accent Lines ..
C$35.99
ATI Outdoors AK-47 Strikeforce Handguard with Picatinny Rails in Destroyer Gray
3-4 Weeks
Brand: ATI Outdoors Model: ATIA.5.40.2346
Fits: Most AK stamped receiversNote: Will not fit the M-70. (The M-70 has a stamped receiver, but utilizes a different principle of attaching the stock and the gas piston is longer than a standard AK.)Strikeforce Rifle Handguards Ergonomic Design Non-Slip Textured Accent Lines ..
C$35.99
ATI Outdoors AK-47 X1 Recoil Reducing Pistol Grip in Flat Dark Earth
3-4 Weeks
Brand: ATI Outdoors Model: ATIA.5.20.2346
Fits: Most stamped AK-47 receivers. Will not fit milled receivers, PAP M92.X1 Recoil Reducing Pistol Grip Ergonomic Design Great for Shooters of All Hand Sizes Sure-Grip Texture for Increased Control Built-In X Series Recoil Absorbing Backstrap Reduces Muzzle Lift E..
C$35.99
Brand: ATI Outdoors Model: ATIA.5.20.2347
Fits: AR-15 / AR-10Fits Note: Also fits the Ruger 22 Charger Pistol with AR-15 Style GripThe ATI X1 Recoil Reducing Pistol Grip features a material that absorbs the initial shock wave which is the felt punch of the recoil. This increases the shooter’s comfort while reducing the muzzle lift..
C$41.99
Brand: ATI Outdoors Model: ATIA.5.40.2347
Fits: AR-15 / AR-10Fits Note: Also fits the Ruger 22 Charger Pistol with AR-15 Style GripThe ATI X1 Recoil Reducing Pistol Grip features a material that absorbs the initial shock wave which is the felt punch of the recoil. This increases the shooter’s comfort while reducing the muzzle lift..
C$29.99
ATI Outdoors AR-15 X2 Recoil Reducing Pistol Grip in Destroyer Gray
3-4 Weeks
Brand: ATI Outdoors Model: ATIA.5.40.2343
Fits: AR-15 / AR-10Fits Note: The X2 Grip Also Fits the Ruger 22 Charger Pistol with AR-15 Style GripThe ATI AR-15 / AR-10 X2 AR-15 Pistol Grip features a material that absorbs the initial shock wave which is the felt punch of the recoil. This increases the shooter’s comfort while reducing t..
C$29.99
ATI Outdoors Canada - Classic AR-15 / AR-10 Grip
3-4 Weeks
Brand: ATI Outdoors Model: ATI-ARA3200
ATI Outdoors Canada - Classic AR-15 / AR-10 Grip - ATI-ARA3200 - AR-Platforms/M16..
C$22.99
Brand: ATI Outdoors Model: ATI-FPG0100
Fits: Standard Picatinny RailThree-Position Forend Pistol Grip Ergonomic Design Textured Grip Gives You Extra Support & Stability When Shooting Installs Onto a Standard Picatinny Rail (Not Included) DuPont® Extreme Temperature Glass Reinforced Polymer Manufactured in the ..
C$36.99
Brand: ATI Outdoors Model: ATI-RPG0200
Fits:Mossberg 500/535/590/835 12ga & 20ga (proud fit), Maverick 88 12ga & 20ga (proud fit) Remington 870/887 12ga Winchester SXP 12ga For the Winchester 1200/1300 12ga & 20ga (proud fit) you will need an additional adaptor,  SXP model year 2021 and newer will req..
C$86.99
Showing 1 to 20 of 292 (15 Pages)