CDM Gear: Shotgun mounts are different than standard
rifle mounts, requiring the use of special design and materials. To find the
right shotgun light mounts that are crafted from solid materials at low,
affordable prices is no easy matter unless you buy a CDM Gear mount.
CDM Gear's full line of products are available from
Canadian Safety Source.
3-4 Weeks
Brand: CDM Gear
Model: CDM-3SR
Fits current and older BMT, MOD-C, MTR series and BC-R. Will not fit HS2012. The rail measure 1 1/2″ in length and comes with a wrench and 2 8×32 screws that work with CDM Gear products listed above...
C$32.99
3-4 Weeks
Brand: CDM Gear
Model: CDM-BC-70
The BC-70 light mount is designed for the N-PAP rifle and varients with .66″ barrel size and fits between the gas block and lower hand guard of AK47 rifles such as the Yugo N-PAP M70 and other variants...
C$65.99
3-4 Weeks
Brand: CDM Gear
Model: CDM-BCR-1R
The BC-R-is a 2 piece, modular mount mounting clamp and is designed to fit barrel diameters from .580″ to .700″. Our standard rail mounts right to it. The clamp fits between the gas block and lower hand guard of AK47/AK74 varient rifles and leaves room for a cleaning rod. The rail is centraliz..
C$64.99
3-4 Weeks
Brand: CDM Gear
Model: CDM-BCR-2R
BC-R Light MountThe BC-R-is a 2 piece, modular mount mounting clamp and is designed to fit barrel diameters from .580″ to .700″. Our standard rail mounts right to it. The clamp fits between the gas block and lower hand guard of AK47/AK74 varient rifles and leaves room for a cleaning rod. T..
C$85.99
3-4 Weeks
Brand: CDM Gear
Model: CDM-BCR-IP
The BC-R-is a 2 piece, modular mount mounting clamp and is designed to fit barrel diameters from .580″ to .700″. Our standard rail mounts right to it. The clamp fits between the gas block and lower hand guard of AK47/AK74 varient rifles and leaves room for a cleaning rod. The rail is centraliz..
C$85.99
3-4 Weeks
Brand: CDM Gear
Model: CDM-BC-47
The BC-47-2 light mount is designed for the .592″ barrel size and fits between the gas block and lower hand guard of AK47 rifles such as the WASR 10/63 and other Romanian variants...
C$65.99
Brand: CDM Gear
Model: CDM-BMT-20
CDM Gear - BMT with 3 Slot Rail - 20 GA Shotgun Flashlight Mount - CDM-BMT-20 - Mounts/Rails & Adapters..
C$103.99
3-4 Weeks
Brand: CDM Gear
Model: CDM-DWS-BT-BLK
The BT (Boat Tail) Wave Safety In BlackThe CDM Gear Patented Wave safetys were created to give you a little more reach and control when activating the safety on your Mossberg shotgun. By creating a second contact and control point closer to the operator, the safety can be rocked on and off more ..
C$33.99
3-4 Weeks
Brand: CDM Gear
Model: CDM-DWB3
The DELTA Wave Safety In BlackThe CDM Gear Patented Wave safetys were created to give you a little more reach and control when activating the safety on your Mossberg shotgun. By creating a second contact and control point closer to the operator, the safety can be rocked on and off more easily wi..
C$33.99
3-4 Weeks
Brand: CDM Gear
Model: CDM-G8TR-C
CDM Gear G8TR-C (gator-c) rail uses our patented “Ring and Rail” design. The C designation is for “cantilevered” to fit over the front side lip of M-LOK MOE handguards and forends. This dual purpose design allows the use of a 1″ tactical light OR a rail mounted light. This is an inline m..
C$55.99
3-4 Weeks
Brand: CDM Gear
Model: CDM-G8TR-C
CDM Gear - G8TR-C M-LOK Cantilever Light Mount - CDM-G8TR-C - Mounts/Rails & Adapters..
C$59.99
Brand: CDM Gear
Model: CDM-HS2012
CDM Gear HS2012 fits Mossberg factory heat shields to provide a mounting spot for your tactical light...
C$48.99
3-4 Weeks
Brand: CDM Gear
Model: CDM-LP5
CDM Gear 5 Slot M-LOK Mounting Rail is a super low profile rail for mounting picatinny and weaver style accessories. It comes with all hardware including thread locking screws, t-nuts and a wrench. It is made from aluminum and is hard coat anodized for durability.FITS: M-LOK supported acces..
C$32.99
Brand: CDM Gear
Model: CDM-12-2-20
3 Only - CDM Gear - 20ga to 12ga Magazine Mount Spacer - CDM-12-2-20 -..
C$11.99
3-4 Weeks
Brand: CDM Gear
Model: CDM-BC-47-1
The BC-47-1 light mount is designed for the .592″ barrel size and fits between the gas block and lower hand guard of AK47 rifles such as the WASR 10/63 and other Romanian variants...
C$65.99
3-4 Weeks
Brand: CDM Gear
Model: CDM-BMT-CLAMP
CDM Gear - BMT Magazine Clamp for 12GA Shotguns - CDM-BMT-CLAMP - Remington..
C$42.99
Brand: CDM Gear
Model: CDM-CHS.
The CHS (Cantilever Hand Stop) Light Mount was designed with Magpul shotgun forends in mind, especially for the Remington TAC-14 and Mossberg Shockwave with a Magpul forend...
C$59.99
Hot
3-4 Weeks
Brand: CDM Gear
Model: CDM-DWS
The CDM Gear Patented Wave safetys were created to give you a little more reach and control when activating the safety on your Mossberg shotgun. By creating a second contact and control point closer to the operator, the safety can be rocked on and off more easily without excessive reach or even taki..
C$32.99
3-4 Weeks
Brand: CDM Gear
Model: CDM-G8TR
G8TR Light MountCDM Gear G8TR (gator) rail uses our patented “Ring and Rail” design. Designed as a forward mount it fits M-LOK handguards and forends. This dual purpose design allows the use of a 1″ tactical light OR a rail mounted light. This is an inline mount so it can be mounted anywhe..
C$55.99
Brand: CDM Gear
Model: CDM-MTR
The CDM Gear MTR with included 3 slot rail is the latest
offering in the MT series of clamps for lights with built in attachment points.
This 1.7oz clamp fits in a 1/2" of space so it is perfect for the Mossberg
590A1 and just about any other shotgun with a 25mm magazine tube and room to
mount i..
C$90.99