Menu
Your Cart

H&R/NEF

ATI Outdoors - H&R/NEF Adjustable Shotforce Stock and Forend
Hot 3-4 Weeks
Brand: ATI Outdoors Model: ATI-HRN4100
Fits: Most H&R/NEF 12, 16, & 20 Ga, 410, H&R and NEF single shot shotguns or rifles. Does not fit the H&R Pardner Pump or Youth Model Firearms.Shotforce Pistol Grip Style Stock & Forend Package Compact for Transport and Carry Length of Pull: 10 3/4” to 14 3/4” T..
C$111.99
Choate Machine - H&R / NEF Varmint Forend
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-02-08
Turn your H&R Handi-Rifle or Sportster in to a varmint rifle.The varmint forend will give your rifle all the qualities needed to be a varmint or target gun. Forend is wide and flat on bottom for shooting off of sand bags. Comes with a bipod mounting adapter for Harris bipods. Forend will fit al..
C$79.99
Choate Machine - H&R Checkered Forend
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-02-01
H&R Checkered Forend. Same as our H&R forend, but checkered...
C$46.99
Choate Machine - H&R Checkered Stock
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-01-18
H&R Checkered Stock. Fits all H&R single shot shotguns and rifles. Same stock as our H&R Monte Carlo stock, but with checkered pistol grip.This stock does not come with a bolt. Normally the stock bolt fits. If you are changing over from a Youth stock, you will need to request the bolt fo..
C$46.99
Choate Machine - H&R Conventional Forend
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-02-04
We also offer a conventional-style stock these guns. Will fit 12, 16, 20, 28, .410 GA. and all rifles. Will not fit Full rifled 12ga slug barrels...
C$35.99
Choate Machine - H&R Conventional Stock
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-01-08
We also offer a conventional-style stock and forearm for these guns. The stock has a rubber recoil pad and sling swivel studs. For a compact home defense weapon you can put a pistol grip and store-arm forend together for an overall length of 26″. The barrel must be 22″, with the grip, in order to co..
C$69.99
Choate Machine - H&R Mark 6 12ga Stock
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-01-10
Our Mark 6 stock will hold (5) five rounds of shotgun ammo. The tension can be adjusted to vary how hard the rounds are to remove by tightening the adjustment screws on the side of the shell holder. Great way to always have additional ammo for your single shot shotgun!! Length of pull is adjustable ..
C$141.99
Choate Machine - H&R Mark 6 20ga Stock
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-01-09
Our Mark 6 stock will hold (5) five rounds of shotgun ammo. The tension can be adjusted to vary how hard the rounds are to remove by tightening the adjustment screws on the side of the shell holder. Great way to always have additional ammo for your single shot shotgun!! (Only fits the late model gun..
C$141.99
Choate Machine - H&R Mark 6 Handi-Rifle and .410 shotgun Stock
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-01-11
Our Mark 6 stock will hold (5) five rounds of rifle ammo. It will hold from 30-06 length ammo, can also use 308 Win., 243 Win., 44 Rem Mag, 45 Colt, 454 Casull, and .410 shotgun ammo. The tension can be adjusted to vary how hard the rounds are to remove by tightening the adjustment screws on the sid..
C$141.99
Choate Machine - H&R Monte Carlo Stock
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-01-26
Monte Carlo style stock is for use with scoped rifles and shotguns.  Has a soft rubber recoil pad and sling swivel. (Only fits the late model guns with scalloped end receives. Will not fit old receivers with tang.) Will not fit 10 gauge guns...
C$74.99
Choate Machine - H&R Pistol Grip
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-03-02
Fits the single shot shotguns. There are several advantages to having a Pistol Grip. By holding the gun in a more natural position, it is easier to control and aim. Made of fiberglass reinforced polymer and will give a lifetime of shooting performance. Overall length of the shotgun must be 28 inches..
C$51.99
Choate Machine - H&R Store-Arm Forend
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-02-02
Our Store-Arm forend has two storage compartments one 1 x 1 1/2 x 5 1/2 inches and one 1 x 1 1/2 x 3 inches. It has a thumb screw that lets you remove the forend to get to the storage and allows for quick disassembly of the gun...
C$46.99
Choate Machine - H&R Survivor Stock
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-01-06
The H & R Survivor stock has a 3 1/2 x 7 x 1 inch storage compartment that lets you store ammunition or survival gear. The butt pad has a thumb screw that lets you swivel the pad to the side for easy access to the storage. Our Store-Arm fore end sold separately has two storage compartments one 1..
C$71.99
Choate Machine - H&R Tamer 12 Gauge Stock (holds 3 shells)
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-01-22
Our Tamer stocks give you the convenience to store (3) shells on your H&R firearms. They will aid in speeding up your followup shots with your single shot shotgun by placing extra shells into easier reach. (Only fits the late model guns with scalloped end receives. Will not fit old receivers wit..
C$71.99
Choate Machine - H&R Tamer 20 Gauge Stock (holds 3 shells)
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-01-14
Our Tamer single shot stocks gives you the convenience to store (3) shells on your H&R firearms. They will aid in speeding up your followup shots with your single shot shotgun by placing extra shells into easier reach. (Only fits the late model guns with scalloped end receives. Will not fit old ..
C$71.99
Choate Machine - H&R Tamer 410 Gauge Stock (holds 4 shells)
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-01-12
Our Tamer single shot stocks give you the convenience to store (4) shells on your H&R firearms. They will aid in speeding up your followup shots with your single shot shotgun by placing extra shells into easier reach. (Only fits the late model guns with scalloped end receives. Will not fit old r..
C$71.99
Choate Machine - H&R Tamer Forend
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-02-06
Our Tamer forend matches the tamer stock. Does not have a sling swivel stud...
C$36.99
Choate Machine - H&R Varmint Stock
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-01-16
Turn your H&R Handi-Rifle or Sporter in to a varmint rifle.The Varmint Stock will give your rifle all the qualities needed to be a varmint or target gun. Has a screw type mono pod on the bottom of the stock. It uses our spacer system (for adjustable length of pull by adding or removing spacers) ..
C$105.99
Choate Machine - H&R Youth Pink Stock & Forend Set
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-01-34
H&R conventional & Monte Carlo stocks come with a 1-inch rubber recoil pad and quick detach sling swivels. Youth stocks have a length of pull of 11 3/4 inches. These stocks fit 12, 16, 20, 28, .410 GA, and all rifles. (Only fits the late model guns with scalloped end receives. Will not fit o..
C$99.99
Choate Machine - H&R Youth Stock
3-4 Weeks
Brand: Choate Machine& Tool Model: CMT-19-01-24
This stock fits the H&R and NEF shotguns and rifles. Length of pull is 11 3/4 inches. Will fit smaller shooters. (Only fits the late model guns with scalloped end receives. Will not fit old receivers with tang.)Weight- 1 lb .2ozL.O.P.- 11 3/4 in...
C$69.99
Showing 1 to 20 of 20 (20 Pages)