Mounts/Rails & Adapters - page 9

If you own a Walther PPQ V4 produced initially as a duty gun for Military and Law Enforcement and use OEM sights and want to improve accuracy, one of the best upgrades you can make is an optic system.  To get the best performance from your Walther pistol using a Holosun 407k/507k, you will need..

If you own a Walther PPQ V4 MIL produced initially as a duty gun for Military and Law Enforcement and use OEM sights and want to improve accuracy, one of the best upgrades you can make is an optic system.  To get the best performance from your Walther pistol using a Holosun 509T, you will need ..

If you own a Walther PPQ V4 produced initially as a duty gun for Military and Law Enforcement and use OEM sights and want to improve accuracy, one of the best upgrades you can make is an optic system.  To get the best performance from your Walther pistol using a Trijicon RMR/SRO and Holosun 407..

If you own a Walther PPQ V4 produced initially as a duty gun for Military and Law Enforcement and use OEM sights and want to improve accuracy, one of the best upgrades you can make is an optic system.  To get the best performance from your Walther pistol using a Trijicon RMRcc, you will need th..

Fits current and older BMT, MOD-C, MTR series and BC-R. Will not fit HS2012.  The rail measure 1 1/2″ in length and comes with a wrench and 2 8×32 screws that work with CDM Gear products listed above...

The BC-70 light mount is designed for the N-PAP rifle and varients with .66″ barrel size and fits between the gas block and lower hand guard of AK47 rifles such as the Yugo N-PAP M70 and other variants...

The BC-R-is a 2 piece, modular mount mounting clamp and is designed to fit barrel diameters from .580″ to .700″.  Our standard rail mounts right to it. The clamp fits between the gas block and lower hand guard of AK47/AK74 varient rifles and leaves room for a cleaning rod. The rail is centraliz..

BC-R Light MountThe BC-R-is a 2 piece, modular mount mounting clamp and is designed to fit barrel diameters from .580″ to .700″.  Our standard rail mounts right to it. The clamp fits between the gas block and lower hand guard of AK47/AK74 varient rifles and leaves room for a cleaning rod. T..

The BC-R-is a 2 piece, modular mount mounting clamp and is designed to fit barrel diameters from .580″ to .700″.  Our standard rail mounts right to it. The clamp fits between the gas block and lower hand guard of AK47/AK74 varient rifles and leaves room for a cleaning rod. The rail is centraliz..

The BC-47-2 light mount is designed for the .592″ barrel size and fits between the gas block and lower hand guard of AK47 rifles such as the WASR 10/63 and other Romanian variants...

The BC-47-1 light mount is designed for the .592″ barrel size and fits between the gas block and lower hand guard of AK47 rifles such as the WASR 10/63 and other Romanian variants...

CDM Gear - BMT Magazine Clamp for 12GA Shotguns - CDM-BMT-CLAMP - Remington..

CDM Gear G8TR-C (gator-c) rail uses our patented “Ring and Rail” design. The C designation is for “cantilevered” to fit over the front side lip of M-LOK MOE handguards and forends.  This dual purpose design allows the use of a 1″ tactical light OR a rail mounted light.  This is an inline m..

CDM Gear - G8TR-C M-LOK Cantilever Light Mount - CDM-G8TR-C - Mounts/Rails & Adapters..

CDM Gear 5 Slot M-LOK Mounting Rail is a super low profile rail for mounting picatinny and weaver style accessories. It comes with all hardware including thread locking screws, t-nuts and a wrench. It is made from aluminum and is hard coat anodized for durability.FITS: M-LOK supported acces..

CDM Gear Scout-C light mount is a side mount cantilever designed to accept Surefire M300/M600 Scout, Streamlight Protac Rail Mount 1, 2 and HL-X (non-laser) and others.  All hardware to mount to M-LOK slots are included along with wrenches and 2 x 8-32 FSCS to mount the light. Mounts can be pur..