Most folding stocks have no comb to rest your cheek against for stability and proper shooting grip. The Samson AK-47 Cheek Rest solves that by providi..
Sleek new design. SKS gastube scope mount that replaces the factory gas tube and upper hanguard. Picatinny rail on top is designed to allow shooters t..
Fits: Most 12, 16 and 20 Ga and .410 pump shotgun barrels. Heatshields should not be used on Mossberg Mariner or Remington Marine Coat Shotguns. This&..
Sleek new design. SKS gastube scope mount that replaces the factory gas tube and upper hanguard. Picatinny rail on top is designed to allow shooters t..
Held open with spring tension, this bipod replaces the folding bayonet on most SKS pattern rifles. Folding out of the way when not in use, it can be q..
Fits: Most 12, 16 and 20 Ga and .410 pump shotgun barrels. Heatshields should not be used on Mossberg Mariner or Remington Marine Coat Shotguns. This&..
Traditional lever style wider extended bolt handle for Ruger 1022™ type rifles. Fully machined from 17-4 stainless steel this bolt handle allows you to comfortably draw back the bolt on the rifle. The flat shape also mitigates the ability of an ejected shell to bounce off of it and back into the eje..
Traditional lever style wider extended bolt handle for Ruger 1022™ type rifles. Fully machined from 17-4 stainless steel this bolt handle allows you to comfortably draw back the bolt on the rifle. The flat shape also mitigates the ability of an ejected shell to bounce off of it and back into the eje..
This mount fits:
Ruger 10/22
Ruger 10/22 Takedown.This scope mount will fit the 10-22, 10-22 takedown and is lowered to allow for use of rear sight with mount mounted...
This mount fits:
Ruger 10/22
Ruger 10/22 Takedown.This scope mount will fit the 10-22, 10-22 takedown and is lowered to allow for use of rear sight with mount mounted...
This mount fits:
Ruger 10/22
Ruger 10/22 Takedown.This scope mount will fit the 10-22, 10-22 takedown and is lowered to allow for use of rear sight with mount mounted...
This mount fits:
Ruger 10/22
Ruger 10/22 Takedown.This scope mount will fit the 10-22, 10-22 takedown and is lowered to allow for use of rear sight with mount mounted...
The Original Chassis takes AR-style handguards, grips, and stocks. I will also have my own carbon fiber stocks available for it soon. If you want my new Comp Chassis, click here: Comp Chassis Page. This chassis only fits standard Ruger® 10/22 receivers – most aftermarket receivers like Volquart..
Midwest Industries Inc made chassis for the Ruger® 10/22 TakeDown®
Only compatible with new Ruger® 10/22 TakeDown® Models*Non-Ruger aftermarket receivers and accessories may or may not fit this chassis*
*Not Compatible with aftermarket trigger groups and drop in triggers***Any modification..
FeaturesLightweight design with a slim profile
True Free Float Design
Mounting bolt and wrench included
13.0" overall length
1.290" Inside Diameter
Two built in anti-rotation QD sockets
Features 8 sides of M-Lok™ slots
5-slot polymer M-Lok™ rail included
Construction from 6061..
FeaturesLightweight design with a slim profile
True Free Float Design
Mounting bolt and wrench included
13.0" overall length
1.290" Inside Diameter
Two built in anti-rotation QD sockets
Features 8 sides of M-Lok™ slots
5-slot polymer M-Lok™ rail included
Construction from 6061..
Midwest Industries Inc made hand guard for the Ruger® 10/22 TakeDown®FeaturesLightweight design with a slim profile
True Free Float Design
Mounting bolt and wrench included
13.0" overall length
1.190" Inside Diameter
Two built in anti-rotation QD sockets
Features 8 side..
Midwest Industries Inc made hand guard for the Ruger® 10/22 TakeDown®FeaturesLightweight design with a slim profile
True Free Float Design
Mounting bolt and wrench included
13.0" overall length
1.190" Inside Diameter
Two built in anti-rotation QD sockets
Features 8 side..
Made to fit the Ruger® 10/22® receivers and clones
Uses factory mounting holes
Hard coat anodized 6061 aluminum construction, for a lifetime of service
Matte Black Finish
Weight 1.6 ounces with screws
4.650" AOL Length
Picatinny Rail
Midwest Industries Lifetime Warranty..
Made to fit the Ruger® 10/22® receivers and clones
Uses factory mounting holes
Hard coat anodized 6061 aluminum construction, for a lifetime of service
Matte Black Finish
Weight 1.6 ounces with screws
4.650" AOL Length
Picatinny Rail
Midwest Industries Lifetime Warranty..
Ruger 10/22 Receiver Picatinny/ MIL-STD 1913 Rail, sleek new design.
Mounts onto the top of the 10/22 receiver utilizing the pre-drilled holes on the receiver.
Centerline Sight Channel machined into the rail, so that you can still use the factory iron sights with the rail mounted onto the receiv..