-100x100w.png "Pike Arms Canada")
Briley Mfg - A&S Enhanced Trigger Guard (Benelli M1 Pre 2023 M2 M3 M4, Breda, Franchi Affinity) - PRE 2023 BENELLI M2 - RED - BRI-ASTGM2RED
This is a direct replacement for your OEM trigger guard. Simply remove your trigger guard from your shotgun. Strip off all the parts from the original and install them on our part.
Our part is made of high quality American milled aluminum. It is finished in a gunmetal grey hard anodize and laser marked. We do all of the machining in our shop and the metal finishing is sourced locally.
The patent-pending design has a large scallop on the front to facilitate loading. It was developed in response to the double and quad loading techniques that have been developing in the 3 gun world over the last several years. However, in testing, it was found that the feature dramatically improves single shell loading as well. It almost doubles the effective loading port area.
Does not fit 12 gauge: SBE, SuperSport or any Benelli with trigger pin at the rear of the receiver.
Does not fit 20 or 28 gauge Benelli shotguns.
Our part is made of high quality American milled aluminum. It is finished in a gunmetal grey hard anodize and laser marked. We do all of the machining in our shop and the metal finishing is sourced locally.
The patent-pending design has a large scallop on the front to facilitate loading. It was developed in response to the double and quad loading techniques that have been developing in the 3 gun world over the last several years. However, in testing, it was found that the feature dramatically improves single shell loading as well. It almost doubles the effective loading port area.
Does not fit 12 gauge: SBE, SuperSport or any Benelli with trigger pin at the rear of the receiver.
Does not fit 20 or 28 gauge Benelli shotguns.
C$353.99
